Our Customers
1. New York Port Authority
2. Central Bank Of The Bahamas
3. Miami-Dade College
4. Florida International University
5. Comfort Suites (Choice Hotel Chain)
2. Central Bank Of The Bahamas
3. Miami-Dade College
4. Florida International University
5. Comfort Suites (Choice Hotel Chain)
Contact Us
Have one of our professional Flat Roof consultants help you with your Flat Roof Repair needs.
Have one of our professional Flat Roof consultants help you with your Flat Roof Repair needs.
Final Flat Roof
Learn More About
Learn More About
|
BEST FOR THE BUILDING
• FFR-K1 becomes stronger when exposed to UV and moisture.
• FFR-K1 has no ponding water exclusion and moisture makes us stronger. • FFR-K1 is a fully bonded monolithic seamless roof system. • FFR-K1 performs equivalent to R-19 insulation. • FFR-K1 bonds and insulates all dissimilar properties on the roof. • No disruption to building or business use during restoration. • No toxic fumes to disturb customers. • No loss of revenue. |
|
BEST FOR THE BUDGET
• FFR-K1 turns temporary repairs into a permanent roof solution over four years.
• FFR-K1 allows building owners to take control of both repair cost and timing. • FFR-K1’s Energy Star rating can reduce utility consumption up to 40%. • FFR-K1 reduces AC equipment cost due to reduce work load. • No Maintenance required for an FFR-K1 Warranty. • No damage to inventory and displays due to tear off dust and debris. • No damage to inventory due to toxic pvc/asphalt fumes. |
|
BEST FOR THE ENVIRONMENT
• FFR-K1 reduces global warming and heat island effect.
• FFR-K1 helps reduces an EPA’s est. 10 million toxic tons of roofing dumped in our landfills. • FFR-K1’s complies with Federal and State executive orders in regards to the environment. • FFR-K1 is title 24 compliant, ultra low VOC. • FFR-K1 encapsulates existing toxins to prevent them from leeching into our aquifers. • FFR-K1 is non petroleum based and reduces our nation’s dependency on foreign oil. • FFR-K1 was awarded the 2011 NY and NJ Green Roofing System |
FFR-K1 Specifications and Comparison
FFR-K1 Thermoset
|
Latex, Elastomeric, Epoxy
|
|
Wet Applied Thickness |
32 mil (1 coat) |
Need multiple (2-5) coats |
Dry Applied Thickness |
32 mil (1 coat) |
4 to 6 mil (may need 2-5 coats) |
Hail Stopping Power |
2" Hail @140MPH |
Zero |
Durability |
1 mil surface lost every 10 years |
1 mil surface lost each year |
Warranty |
Up to 20 years, Water,
Reflectivity, Flex |
0-10 years Reflectivity only |
Ponding Water? |
Permanently resistant |
No resistance |
Insulation (R19) |
Beats asbestos insulation by 25% |
None |
Estimated savings AC |
15-40% |
-------- |
| Coat a wet surface? | Yes (even under salt water) |
No |
| Barrier to water penetration? | Yes |
No |
| Adheres to all roof surfaces: | Yes |
Metal, Cap sheet |
| Adheres to EPDM? | Yes |
No |
| Mildew or Mold Resistance | Yes (microorganisms cannot adhere) |
Medium (High at pH mix prevents) |
| Salt Spray Test | 500 hour pass |
Not Applicable |
| Sustained Flexibility | 200% for the life of the product |
Not Applicable |
| Flexibility Retention | Retained at sub zero conditions (-92F) |
Not Applicable |
| Solar reflectance | 90% |
80's (1st yr only) |
| Stops Thermal Shock | Two ways (reflectivity and insulation) |
Reflectivity only |
| Seamless Re-Roofing Sys? | Yes |
No |
| Primer needed over rust | No |
Yes |
| UV resistance | Superior |
Yes |
| AC Oil + Residue Resist. | Immune |
No |
| Alkali attack | Superior resistance |
Not Applicable |
| Cathodic Tested | Yes (Voltage & Electric Resistant) |
No |
